exida Academy Training
FSE 100 - IEC 61511: Functional Safety Analysis, Design, and Operation
May 5 - May 8, 2025 - Sellersville, PA
STATUS: Registration Open (Subject to Cancellation)Enroll Now Back to Course Schedule
Venue Details
exida USA
80 North Main Street
Sellersville, PA 18960
USA
Sellersville is located in bucolic Bucks County, PA. By car, the training facility is only 1 hour from Philadelphia, 2 hours from New York City, and 30 minutes from Allentown, PA. Please contact us if you have any questions.
Recommended Lodging
The historic Washington House Hotel is just 2 blocks from our facility making for an easy commute to our courses.
Please read our Cancellation and Reschedule Policy before signing up for any course.
Course Description:
Looking to become a CFSE or CFSP? This is the course you'll need to pass the exam!
Also known as FSE 100, this course provides an overview of process industry safety engineering from the point of view of the Risk Analyst, Process Safety Coordinator, and Control Systems Design Engineer.
It delivers a complete overview of the functional safety lifecycle. The course reviews Process Hazard Analysis (PHA), Consequence Analysis, Layer of Protection Analysis (LOPA), Safety Integrity Level (SIL) Target Selection, Safety Requirements Specification (SRS) generation, failure rates, device and system reliability, SIF verification, SIF detailed design and Operations requirements.
This course forms a broad review in preparation for the Certified Functional Safety Expert (CFSE) and Certified Functional Safety Professional (CFSP) process industry application engineering exams.
Those looking to attend the FSE 100 course, should have a foundational knowledge of functional safety, with experience in process safety or as a controls engineer. An overall knowledge of high school level math is essential, and knowledge of calculus is useful, to help with understanding the SIL calculations.
Course Topics
FSE 101 (Days 1 & 2)
- Introduction to Safety Instrumented Systems
- Principles of Risk Management
- The Safety Lifecycle
- Process Hazard Analysis (PHA)
- Consequence Analysis
- Likelihood Analysis
- Layer of Protection Analysis (LOPA)
- Tolerable Risk
- SIL Target Selection
- Safety Requirements Specification (SRS)
FSE 102 (Days 3 & 4)
- Safety Instrumented Systems (SIS) failure
- From failure rate to SIL
- Single devices to system
- Redundant Architectures
- Requirements to SIF
- SIF Design and Verification in the Safety Lifecycle
- SIF Detail Design
- Operations
- Functional Safety Management Requirements
- Functional Safety Assessments
Who Should Attend:
- Process Safety engineer
- Control engineer
- Reliability engineer
- Engineering/Operations management
- Plant risk analysts
- Loss prevention professionals
- CFSE and CFSP Process Application candidates
The FSP Exam (Process Specialty):
The exida Functional Safety Practitioner (FSP) program is a certificate program that provides confirmation that an attendee shows competency by retaining the knowledge presented in this course. The FSP program also provides an analysis of where the candidate’s strengths and weaknesses lie, helping participants judge their competency level if interested in obtaining a certification like the CFSE or CFSP. The exam will be given at the conclusion of the training course, and is optional. Therefore if you wish not to participate, please let your instructor know. The candidate must achieve a minimum of 80% on the exam in order to receive their FSP certificate.